Device Control

The Device Control of MDCC supports the use of a device that can be connected to a computer to control a custom device group or all devices through the Total Control.


Trial

Professional users have a 7-day trial period.


Purchase

This features is a pay feature. If you purchase "Multi-devices Control (70)" or "Multi-devices Control (100)", you can get this feature for free.


Add Device

There are three ways to add devices to the Device Control list. The added devices can be used to control other devices connected to the Total Control.

1. USB

Device Control

All the devices connected to the Total Control will be displayed here. Select the device and click "Add Now". The Total Control will push the TC Viewer app to the device, install and connect.

2. Scan QR Code

Device Control

If the TC Viewer app is not installed on the device, use any scanning software to scan the QR code to install it. After the installation, connect the device and the PC to the same TCP / IP network, and then use the TC Viewer's scanning function to scan the QR Code to connect.

3. TCP/IP

Device Control

If the device has the TC Viewer app installed, connect the device and the PC to the same TCP / IP network, enter the IP address displayed on PC client in the TC Viewer, and connect to the Total Control.

If you select "Connection needs confirmation", you need to confirm on the computer when connecting.


Using these three methods, you can add the device to the Device Control list and enable it immediately. The devices in the list can be enabled or disabled, or deleted.


Control

After successful connection, you can see the screen of the master device on TC Viewer. The default master device is the master device of the Total Control MDCC. The master device can be switched in TC Viewer, and the MDCC will be changed at the same time.

When you use the TC Viewer to perform operations such as swipe, click, and input on the main control device, all operations will be synchronized to the Controlled Device Group(the device selected in MDCC by default).It can be modified in TC Viewer, and the MDCC will be changed at the same time.


Settings

After successful connection, the screen of the master device and a floating button will be displayed on the TC Viewer device.

Device Control

Clicking the floating button will display four function buttons and a back button

Device Control